Kellyco Metal Detectors logo
Kellyco Metal Detectors logo

All articles

How do I pinpoint a target?Updated a year ago

Question: How do I pinpoint a target?

 

Answer: Slowly and methodically sweep your searchcoil from side to side, keeping it one to two inches above the surface. Overlap each sweep by advancing the searchcoil by about one quarter to one half of its diameter. Scanning in a straight line helps to keep the searchcoil level and the overlap sweeps uniformly while reducing the likelihood of lifting the searchcoil after each sweep. Listen for a peak in the audio sound. Hold the searchcoil one to two inches off the ground and slowly sweep it back and forth in an X pattern. Note where the sound becomes the loudest. The target should be located in the center of the imaginary X. Many of today’s modern metal detectors are equipped with an electronic pinpoint button. 

 

Relevant to: 

  •  
Was this article helpful?
Yes
No