Kellyco Metal Detectors logo
Kellyco Metal Detectors logo

All articles

Minelab

What is the AH for a Minelab GPZ 7000 battery?

Question: What is the AH for a Minelab GPZ 7000 battery?. Answer: The Minelab GPZ 7000 has a GPZ 7000 7.2v 4.4Ah Li-Ion Rechargeable Battery.

How long does the Minelab CTX 3030 battery last?

Question:. How long does the Minelab CTX 3030 battery last?. Answer:. The detector will operate for up to 13 hours using the Li-Ion battery pack and a minimumof seven hours using an alkaline battery pack. Relevant to:

How to clean the Minelab CTX 3030?

Question:. How to clean the Minelab CTX 3030?. Answer:. Hose the detector with clean water after use on the beach (wading or submersion).If, through extensive use, the carbon-fiber upper or lower shafts become noticeably scored,wipe these thoroughly

How long does the Minelab CTX 3030 take to charge?

Question:. How long does the Minelab CTX 3030 take to charge?. Answer:. The CTX 3030 standard pack is supplied with two types of battery pack:1. A sealed rechargeable Lithium-Ion (Li-Ion) smart battery, which comes with acharger (BC 10) that plugs in

How many frequencies are in a Minelab CTX 3030?

Question: How many frequencies are in a Minelab CTX 3030?. Answer: The Minelab CTX 3030 has 28 frequencies that operate in a range between 1kHz and 100kHz.

How much is the Minelab CTX 3030?

Question: How much is the Minelab CTX 3030?. Answer: $2,499.00.

How to upgrade firmware for your Minelab CTX 3030

Question: How to upgrade firmware for your Minelab CTX 3030. Answer:   1. CTX 3030 Connected and update availableWhen the CTX 3030 is connected to the PC and XChange 2 is running the CTX 3030collection will be displayed. If an update is available the

What is the difference between a Garrett AT Pro and Minelab CTX 3030?

Question: What is the difference between a Garrett AT Pro and Minelab CTX 3030?. Answer:. Comparison of Garrett AT Pro and Minelab CTX 3030 FrequencyThe Garrett AT Pro has an adjustable 15 kHz frequency. The Minelab CTX 3030 has multi-frequency and u

How do I use the Minelab CTX 3030 wm 10 wireless audio module?

Question: How do I use the Minelab CTX 3030 wm 10 wireless audio module?. Answer: To connect the WM 10 to your detector:. 1. Press and hold the Power button on the WM 10 to turn it on. 2. Press and hold the Pairing button. The Pairing LED will start

How do I reset a Minelab CTX 3030?

Question: How do I reset a Minelab CTX 3030?. Answer: The CTX 3030 is delivered in its factory preset state and any changes made to the detector’s settings are saved automatically. These settings will remain until you manually change or reset them us

When did Minelab fix the armrest on the CTX 3030?

Question: When did Minelab fix the armrest on the CTX 3030?. Answer: Minelab made an upgrade on the CTX-3030 produced in 2016 and beyond. Here is what the upgrades consists of:1 - An upgraded battery seal2 - An upgraded arm cuff that locks in to plac

How do I set sensitivity on Minelab CTX 3030 Metal Detector?

Question: How do I set sensitivity on Minelab CTX 3030 Metal Detector?. Answer: When set to Auto Sensitivity, the detector continuously measures the response from magnetic ground and sets the sensitivity level in order to minimize the effects of thes

What size search coil is on the Minelab CTX 3030?

Question: What size search coil is on the Minelab CTX 3030?. Answer: The Minelab CTX-3030 comes standard with an 11" waterproof DD Smart Coil.

Minelab SDC 2300: How To Use

Question:. Minelab SDC 2300: How To Use. Answer:. You can find the use of the Minelab SDC 2300 on the following web page:. https://www.kellycodetectors.com/pdf/manuals/sdc-2300.pdf

What is the Difference Between the Minelab GPX 5000 and a Minelab SDC 2300?

Question:. What is the Difference Between the Minelab GPX 5000 and a Minelab SDC 2300?. Answer:. There are several differences between the GPX 5000 and the SDC 2300:1) The SDC 2300 is fully Submersible up to 10 Feet (3m) of Water and the GPX 5000 is

How to connect two devices at the same time to the Minelab Equinox 600 & 800?

How to connect two devices at the same time to the Minelab Equinox 600 & 800?. In order to connect more than one device to the Minelab Equinox 600 or the Minelab Equinox 800 you need to first pair the WM 08 Module to the detector. Pairing the WM 08Pa

What Metals will the Minelab GPX 5000 Detect?

Question: What Metals will the Minelab GPX 5000?. Answer: The GPX 5000 is designed to detect solid gold nuggets, as well as coins and relics.

What Companies Make Waterproof DD Coils for a Minelab GPX 5000 Metal Detector?

Question: What Companies Make Waterproof DD Coils for a Minelab GPX 5000 Metal Detector?. Answer: While many of the coils available for the GPX 5000 are not waterproof, those produced by Nugget Finder are. We carry a wide selection of their coils inc

How To Use The Minelab GPX 5000?

Question: How To Use The Minelab GPX 5000. Answer: As with any detector, there is a learning curve. The GPX 5000 is no different. Getting started quickly only takes 6 steps following the Quick Start Guide which is on page 2 of the manual. See the ent

What Country is the Minelab GPZ 7000 Made in?

Question: What Country is the Minelab GPZ 7000 Metal Detector Made in?. Answer: Minelab metal detectors are designed in Australia, some made in Australia, and some made in Malaysia by an American owned company, from parts sourced from all over the wo

Where to Buy Minelab GPZ 7000?

Question: Where to Buy Minelab GPZ 7000 Metal Detector?. Answer: We are an authorized Minelab dealer and the GPZ 7000 can be purchased through one of our Customer Experience Team members. Minelab also offers many retail locations outside of the US th

How Deep Can the Minelab GPX 5000 Detect Gold?

Question:. How Deep Can the Minelab GPX 5000 Detect Gold?. Answer:. Depth is hard to determine. It all depends on the ground conditions and the placement of the target.

What is the Difference Between the GPX 4500 and GPX 5000?

Question: What is the Difference Between the GPX 4500 and GPX 5000?. Answer: GPX 5000 has 2 coils, GPX 5000 has 8 soil/timings, Salt/Gold timings, Improved enhance soil/timing, and Rx gain adjustment 1-20.

What Coil Should I Use on the Minelab GPX 5000 when Relic Hunting?

Question: What Coil Should I Use on the Minelab GPX 5000 when Relic Hunting?. Answer: Minelab 8" Round Mono Commander Search Coil (GPX / GP / SD).

How Much is the Minelab GPX 5000?

Question: How Much is the Minelab GPX 5000?. Answer: $3,999.00.

Can you tell me about the Coiltek coils for the Equinox?

Question: Can you tell me about the Coiltek coils for the Equinox?. Answer: Once available, be comfortable knowing that they are fully Minelab approved and available in three sizes, they simply plug-and-play into your 600 or 800 Minelab Equinox detec

What coils are available for my Minelab Vanquish 540?

Question: What coils are available for my Minelab Vanquish 540?. Answer: The 540 Pro pack comes with a V8 (8" x 5") and a V12 (12" x 9") coil. There is also a V10 (10" x 7") available. These coils are compatible with Minelab Vanquish 340, 440, 540 an

Can the coils be changed on a Minelab Excalibur II?

Question:. Can the coils be changed on a Minelab Excalibur II?. Answer:. No. The Minelab Excalibur coil and headphones are hardwired to the unit. Once the unit is out of warranty, some customers do modify the coils and headphones with a authorized Mi

What is the difference between Minelab Pro-find 35 and 20?

Question: What is the difference between Minelab Pro-find 35 and Minelab Pro-Find 20?. Answer: The sensitivity is fixed on the Pro-find 20. The Pro-find 20 is not waterproof only splashproof whereas the Pro-Find 35 is waterproof to 20 feet. The Pro-f

How long does it take to charge a Minelab Equinox Battery?

Question:. How long does it take to charge a Minelab Equinox Battery?. Answer:. It take 4 hours to full charge a Equinox the 1st time.

I want to buy a Minelab Equinox, but I'm concerned about the sealed battery. Can I replace it?

Question: I want to buy an Minelab Equinox, but I'm concerned about the sealed battery. Can I replace it?. Answer: First and foremost before even attempting it I would contact Minelab directly at 1-877-767-6522 to make sure you will not be voiding an

How can I fix my Minelab Excalibur II? The knob appears to be stripped.

Question: How can I fix my Minelab Excalibur II? The knob appears to be stripped. Answer: Anderson Detector Shafts makes a replacement knob set, these deluxe knobs are larger and easier to adjust. Made with a brass insert that will lock down tight wi

Can I pair the Garrett AT waterproof pinpointer with the Equinox 800?

Question: Can I pair the Garrett AT waterproof pinpointer with the Equinox 800?. Answer: No, the Minelab Equinox 800 uses bluetooth technology and the Garrett AT waterproof pinpointer uses Z-lynk technology, they are not compatible.

Does the Minelab Vanquish 540 Pro package have wireless headphones?

Question:. Does the Minelab Vanquish 540 Pro package have wireless headphones?. Answer:. The Minelab Vanquish 540 Pro package comes with Bluetooth Wireless headphones.

Pairing Minelab Equinox Wireless Headphones

Pairing you Minelab Equinox wireless headphones is easy to do! Please follow the steps below to pair your Minelab wireless headphones:. Make sure your WM  08 Wireless module is off. Note: You can pair up to 4 sets of wireless headphones to the WM 08

How do I update the Minelab Equinox?

You have purchased your Minelab Equinox 600 or 800 and want to update to install the latest software. Follow the steps below. DOWNLOAD THE UPDATE.

What is the difference between the Minelab Equinox 600 and the 800?

Both the Equinox 800 and 600 are really great machines and operate about the same. There are some key differences between the two. The Equinox 800 has a some additional features and more customizations. Minelab Equinox 800. Minelab Equinox 600. The b